2024MNRAS.532.2644M

The Molonglo Cross was first commissioned in 1965, as a transit radio (408 MHz) interferometer with the largest collecting area in the Southern hemisphere. In 1981, the telescope was redeveloped as an Earth-rotation synthesis interferometer using only the East-West arm (843 MHz), known as the Molonglo Observatory Synthesis Telescope. While the East-West arm was revitalized in the 2010s, the (slightly larger) North-South (NS) arm, which consists of two co-linear paraboloid cylindrical reflectors spanning 2 × 778 m × 12.7 m, had not been used for over 40 yr. Re-fitting this 19 800-m² collecting area with modern electronics is a cost-effective way of producing a significant survey instrument. The upgrades made to the entire signal chain of the NS arm from the antenna through the transport, digitization, and digital signal processing are described, along with the subsequent performance of the system. The instrument was designed to undertake pulsar timing and searching for dispersed single pulses [e.g. from fast radio bursts (FRBs)]. The upgraded system operated across the 806.25-856.25-MHz frequency range, and had a primary beam that spans 12.7 × 2.5 deg. It had dual linear polarization capability and a lower system temperature and wider bandwidth compared with the East-West system. The digital signal processing was performed on servers with graphics processing units, which enabled low-latency, high-speed data processing, and made use of pipelines built from existing and custom codes. It timed around 70 pulsars per day while running concurrent FRB searches at nearly 100 per cent duty cycle during its operation.